Coin Value Finder » 1963 Dime Value: are “D”, No mint mark worth money?

1963 Dime Value: are “D”, No mint mark worth money?

The 1963 dime is a valuable coin that has managed to gain quite some popularity among coin collectors and enthusiasts alike. If priced right, they can go for quite a handsome price, and even if you don’t want to sell them, they still make for an interesting collection. 

You must have some questions about the 1963 Dime and its values. We are here to help you with that. Here, we will explain all about the 1963 Dime, so you don’t have to worry about whether they are worth your time and money. Let’s not waste more time and get on with the dimes!

1963 Dime Details

  • Category: Roosevelt dime
  • Mints: Philadelphia, Denver, and San Francisco.
  • Total Mintage: around  1,357,517,180 
  • Obverse Designer: John R. Sinnock  
  • Reverse Designer: Gilroy Roberts 
  • Edge: Reeded
  • Diameter: 17.91 mm
  • Thickness: 1.95 mm
  • Composition: Silver 90%, Copper 10%
  • Weight: 2.5 grams

Below are more details about the 1963 Dime, that can help you familiarize yourself with the 1963 dime and make a well-weighted decision if you ever need to sell or buy this coin. 

1963 Dime Value chart

If you’re interested in the value of 196 Dimes, here is a value chart that can help you determine the approximate value of each coin. Please note that the value of a 1963 dime can vary depending on its condition, mint mark, and any unique varieties or errors. 

Mint Mark Extremely Fine MS63 MS65 MS67
1963 (P) Dime $4.21 $4.86 $7.36 $25.00
1963 D Dime $4.21 $4.86 $7.36 $25.00

1963 Dime Value and Varieties Guides

Given below are the 1963 dime varieties and their values. The following three dimes are commonly known among coin collectors and are quite famous too. 

1963 (P) Dime Value

1963 (P) Dime

  • Type: Roosevelt Dime
  • Edge: Reeded
  • Mint Mark: None
  • Place of Minting: Philadelphia
  • Year of Minting: 1963
  • $ Price: $1.50 to $5.00 for circulated coins, $10 to $50 for uncirculated coins
  • Quantity Produced: 585,655,000
  • Designer/s: John R. Sinnock (obverse), Gilroy Roberts (Reverse)

As 1963 was the final year that the Dime was produced without a mint mark, it is a rare coin. The main reason why this was done was to prevent coin collectors from stockpiling coins from certain mints, and it wasn’t until the next year that mint markings reappeared on all U.S. currency grades.

The 1963 No Mint Dime’s reverse has an olive branch with a torch, and an oak branch, each of which stands for peace, liberty, and strength, while the flipside shows an image of Franklin D. Roosevelt looking left.

In terms of value, 1963 No Mint Dime may sell for between $1.50 and $5.00 in circulated condition, while uncirculated coins can bring up to $50. The quality and uniqueness of a coin greatly affect its worth, with coins with the highest grade of MS67 deemed most valuable.

1963 D Dime Value

1963 D Dime

  • Type: Roosevelt Dime
  • Edge: Reeded
  • Mint Mark: D
  • Place of Minting: Denver
  • Year of Minting: 1963
  • $ Price: $1.50 to $5.00 for circulated coins, $10 to $200 for uncirculated coins
  • Quantity Produced: 585,255,000
  • Designer/s: John R. Sinnock (obverse), Gilroy Roberts (Reverse)

The Denver Mint struck the 1963-D Dime, which shares the same design as the No Mint Dime. The obverse’s “D” mint mark, which denotes that it was produced at the Denver Mint, is the only difference between the two coins.

Just like the No Mint Dime, the value of the 1963-D Dime ranges from $10 to $200 for uncirculated coins and from $1.50 to $5.00 for circulating coins. Coins with the top MS67 grade might trade for a premium, with some going for more than $1000.

Also Read: Top 15 Most Valuable Roosevelt Dimes Worth Money

History of the 1963 Dime

An important turning point for the American Dime came in 1963. The U.S. Mint updated the appearance of the Dime from the previous one, which had been in use since 1946, during this time. On the front side of the new coin was a picture of President Franklin D. Roosevelt, and on the reverse were a torch, an olive branch, and an oak branch.

Roosevelt’s achievements to the nation, notably his leadership during the Great Depression and World War Two, were honored by this design change. Because of his efforts to boost the economy through the New Deal initiatives and his part in launching the March of Dimes charity, the Dime was chosen as the currency to have his picture.

John R. Sinnock, who also created the Franklin half dollar, was the designer of the new Dime. The bundle of sticks, or fasces, which the Italian fascist party had employed during World War II, was shown on the coin’s reverse, which some people mistakenly believed to be a communist mark. The Mint supported the use of the mark, claiming that it was a standard representation of power and harmony.

The new Dime went into circulation on January 30, 1964, even after the uproar and controversy. It immediately gained popularity among both collectors and the general public, and many people were anxious to find copies of the new style. Even though there have been a few small changes over time, the Dime’s appearance has essentially not changed that much. The Mint issued a unique commemorative dime in 1996 to celebrate the design’s 50th anniversary. Roosevelt’s picture appeared in a feature on the coin’s front, while its reverse featured the original torch, olive branch, and oak branch design.

The 1963 dime is a silver coin with a 90% silver and 10% copper composition. It weighs 2.5 grams and measures 17.91mm in diameter. The coin had a total mintage of 1,357,517,180 and was produced in Philadelphia, Denver, and San Francisco.

A 1963 dime’s value is affected by a number of factors, including its quality, mintmark, and appearance of any flaws or unusual types. In general, 1963 dimes that have never been distributed are worth more compared to those that have.

The value of a 1963 dime in unissued condition can range from $1 to $10. If the coin has been used, it will, nonetheless, have a much lesser value. A 1963 dime in circulation could only be worth its 10-cent face value.

The 1963 dime’s mintmark might affect its value as well. The location of the coin’s minting is indicated by little letters called mintmarks. The Denver and San Francisco mints both used mintmarks, while the Philadelphia mint did not. A 1963 dime with a Denver or San Francisco mintmark may be worth a little bit more than one with a Philadelphia mintmark. This is only valid, though, if the coin is in an exceptional state.

Special kinds or errors, in addition to quality and mintmark, can raise the value of a 1963 dime, for instance, the 1963 Double Die Obverse (DDO) dime. This type was created as a result of a double-counting error that occurred during the minting process and had a pronounced impact on the coin’s appearance. Even in circulated conditions, a 1963 dime with this error may be worth a few hundred dollars.

The 1963 Proof dime is yet another example. Proof coins are unique coins that are produced using dies and planchets that have been polished. They feature more detail and a better polish than conventional coins since they are made for collectors. In perfect condition, a 1963 Proof dime might be worth more than $30.

The 1963 design of the Dime is still recognizable and loved by coin collectors and admirers all over the world. The Dime continues to play a significant role in American culture and history today.

1963 Dime Grading

The 1963 dime is graded using the Sheldon Scale. The coin’s condition, wear, luster, and any flaws or variations all play a role in determining each grade, which runs from Poor (P-1) to Perfect Uncirculated (MS-70). The coin’s worth to collectors can be impacted by the grading procedure because a better grade often translates to a greater value. To correctly evaluate the grade of their 1963 dime, collectors should speak with experienced coin graders or use reference materials. 

For more information about grading 1963 dime, the following video can be of help:

List of 1963 Dime Error

The “1963 Dime”, error coins are a category of Roosevelt dimes minted in 1963 that feature unintentional mistakes or anomalies in their design, resulting from various errors during the minting process. And because of these unique features, these anomalous coins are quite high in demand among collectors.

Some of the most recognized 1963 dime error types include:

1. 1963 Dime Double Die Obverse 

1963 Dime Double Die Obverse 

This is one of the most common errors for 1963 Dimes, and it occurs when the obverse (front) side of the coin displays a visible doubling in the date or the motto “IN GOD WE TRUST” because of misalignment during the coin’s striking.  So this usually happens when the design on the die is copied over and over again, producing a coin with a design that is somewhat doubled or fuzzy. The selling price point is quite high because of the increased demand for these coins among collectors. 

2. 1963 Dime Off-Center Strike

1963 Dime Off-Center Strike

Off-center errors are among the 1963 dime errors that are most commonly noticed. This happens when the dies that are used to strike the coin are not aligned properly, which results in the design being out of alignment or perhaps missing entirely. These coins may be rather expensive, particularly if the error is too noticeable.

3. 1963 Dime Clipped Planchet

1963 Dime Clipped Planchet

This particular Roosevelt dime anomaly is characterized by a missing metal section, creating an incomplete or irregular circumference. This error manifests as a missing or clipped portion of metal from the dime’s circumference, often resulting from improperly cutting the planchet before the striking process.

4. 1963 Dime Repunched Mintmark 

When the coin’s mintmark is stamped more than once in slightly different locations, the outcome is a slightly distorted or doubled mintmark, which is known as a repunched mintmark error. While rare, errors of this kind are highly prized by collectors. The repunched mintmark on 1963 dimes can often be observed with a magnifying glass or loupe, revealing subtle discrepancies in the letter’s position or orientation. 

5. 1963 Dime Broadstrike

1963 Dime Broadstrike

When the coin is struck while the collar is not in place, it is known as a broadstrike error, leaving the coin with an extended diameter and a flat edge. Moreover, this might also result in an unfinished or off-center design, increasing the coin’s value.

6. 1963 Dime Clashed Die Error

When the coin-striking dies to collide without a planchet in place, this is known as a clashed die error, leaving a faint imprint of the opposing die on the coin. These errors are rare and highly prized by collectors.

1963 Dime FAQs

1. What is a 1963 dime worth?

The value of a 1963 dime depends on its condition and rarity. A typical circulated 1963 dime is worth its face value of 10 cents, while an uncirculated one can fetch up to a few dollars. Rare variations and errors can be worth significantly more.

2. What are some errors or variations found in 1963 dimes?

Some of the errors or variations found in 1963 dimes include double dies, die cracks or breaks, weak strikes, and off-center strikes. Some valuable variations include proof sets and uncirculated coins.

3. How do I determine the condition of my 1963 dime?

The condition of a 1963 dime can be determined by looking at its overall appearance, including any scratches or wear, the presence of toning, and the sharpness of details. Grading services can also provide a more precise assessment of a coin’s condition.

4. Where can I buy or sell 1963 dimes?

1963 dimes can be bought or sold through coin dealers, online marketplaces, and auction houses. It is recommended to research the current market value of the coin before buying or selling.

2 thoughts on “1963 Dime Value: are “D”, No mint mark worth money?”

  1. I found this article very informative and helpful in determining the value of my 1963 dime. The explanations of the different mint marks and their rarity were especially useful in understanding the factors that affect the coin’s value. The clear photos and descriptions of the different variations of the 1963 dime were also very helpful in identifying my own coin. Overall, this article is a great resource for anyone who wants to learn more about the value of their coins and the factors that affect it. Thanks for sharing this valuable information!


Leave a Comment