Coin Value Finder » 1964 Quarter Value: are “D”, “S”, No mint mark worth money?

1964 Quarter Value: are “D”, “S”, No mint mark worth money?

Have you ever found a coin and wondered if it was worth more than its face value? Now, you might be in luck if you happen to come across a 1964 quarter. This inconspicuous coin has a secret that might increase its value above 25 cents despite its straightforward design and silver composition.

Now, grab a magnifying glass, and let’s examine the intriguing tale behind the 1964 quarter, its current market worth, and the factors that explain why it has managed to hold people’s interest for nearly 60 years.

1964 Quarter Details

  • Denomination: One dollar
  • Composition: 90% silver, 10% copper
  • Weight: 6.25 grams
  • Diameter: 24.3 millimeters
  • Edge: Reeded
  • Designer: John Flanagan
  • Minted in: Philadelphia, Denver, and San Francisco
  • Total mintage: 1 billion 576 million 278 thousand 575

The 1964 quarter is an exceptional piece of American money with tremendous historical and cultural significance. The 90% silver and 10% copper composition of this quarter, which was first produced in Philadelphia, Denver, and San Francisco, gives it a unique look and feel that distinguishes it from contemporary money.

In actuality, the coin is worth more in silver than it does in gold. Collectors should also take into account the coin’s weight and dimension. In comparison to several other coins, the 1964 quarter weighs 6.25 grams and measures 24.3 millimeters.

Philadelphia, Denver, and San Francisco were the three cities that produced the 1964 quarter. It is one of the most prevalent quarters from the 1960s, having been minted by these three mints in a total of 1,576,278,575 coins in 1964.

John Flanagan, the quarter’s designer, is another intriguing component. On the obverse side of the quarter, Flanagan’s design, which has been in use since 1932, is a picture of George Washington. The timeless appeal of Flanagan’s design over the years has been attributed to its ability to be both straightforward and attractive.

1964 Quarter Value Chart

Mint Mark Good Fine Extremely Fine Uncirculated
1964 No Mint Mark Quarter Value (Philadelphia) $0.25 – $1.00 $3.00 – $4.00 $4.00 – $5.00 $10.00 – $85.00
1964 “D” Mint Mark Quarter Value Denver $2.00 – $3.00 $3.00 – $4.00 $4.00 – $5.00 $15.00 – $100.00.
1964 “S” Mint Mark Quarter Value San Francisco $0.50 to $0.75 $0.75 to $1 $3 to $5 $10 to $2001964 Quarter

1964 Quarter Value and Varieties Guides

1964 No Mint Mark Quarter (Philadelphia) Value

1964 No Mint Mark Quarter (Philadelphia)

  • Type: US Quarter
  • Mark Category: No Mint Mark
  • Materials: 90% silver, 10% copper
  • Edge: Reeded
  • Mint Mark: None (Philadelphia Mint)
  • Place of Minting: Philadelphia, Pennsylvania
  • Year of Minting: 1964
  • Face Value: 25 cents
  • Price: Ranges from $0.25 in Good condition to $85 in Uncirculated condition
  • Quantity: 704,135,528
  • Designer: John Flanagan
  • Mass: 6.25 grams
  • Diameter: 24.3 millimeters

The Philadelphia, Pennsylvania mint created the 1964 No Mint Mark Quarter, which has a face value of 25 cents. Due to its composition of 90% silver and 10% copper, this coin was highly sought-after when it was first produced. The value of this coin varies vary depending on its condition, with coins in Excellent condition being worth roughly $0.25 and coins in Uncirculated condition being worth up to $85.

1964 “D” Mint Mark Quarter Value (Denver Mint)

1964 "D" Mint Mark Quarter

  • Type: United States Quarter
  • Mark Category: Circulation Strike
  • Materials: 90% silver, 10% copper
  • Edge: Reeded
  • Mint Mark: D (Denver Mint)
  • Place of Minting: Denver, Colorado
  • Year of Minting: 1964
  • Face Value: 25 cents
  • Price: Ranges from $2 in Good condition to $100 in Uncirculated condition
  • Quantity: 704,135,528
  • Designer: John Flanagan
  • Mass: 6.25 grams
  • Diameter: 24.3 millimeters

The collectible currency known as the 1964 Denver Mint Mark Quarter was produced in the US city of Denver, Colorado. With a face value of 25 cents, this coin was made in a sizable batch of 704,135,528 pieces. This coin has grown in popularity among collectors despite having a relatively high mintage because of its historical relevance and silver content. While coins in Uncirculated condition can sell for up to $100, coins in Good condition can be acquired for about $2.

1964 “S” Mint Mark Quarter Value (San Francisco)

  • Type: United States Quarter
  • Mark Category: Circulating coin
  • Materials: 90% silver, 10% copper
  • Edge: Reeded
  • Mint Mark: “S” (for San Francisco)
  • Place of Minting: San Francisco, United States
  • Year of Minting: 1946
  • Face Value: 25 cents
  • Quantity: 16,152,000 minted
  • Designer: John Flanagan
  • Mass: 6.25 grams
  • Diameter: 24.3 millimeters

The 1964 San Francisco Mint Mark Quarter is a coin that was made in the United States at the San Francisco Mint. This currency was minted in 1946 and has a face value of 25 cents. It had a total production run of 16,152,000 pieces. Despite the fact that this may look like a lot of other coins, it is actually quite little when compared to other quarters made in later years.

Also Read: Top 16 Most Valuable Modern Quarters Worth Money

1964 Quarter History

The history of the 1964 quarter is intriguing and is rooted in a period of upheaval in American history. The 1964 quarter was one of the final U.S. coins to be 90% silver before the nation switched to a less expensive copper-nickel alloy. It was minted soon after the assassination of President Kennedy.

The 1964 quarter represented hope in the midst of tragedy at the time of its debut. The eagle clutching an olive branch and arrows in the reverse design of the coin represented the nation’s dedication to both defense and peace. It served as a remembrance of President Kennedy’s legacy and a warning that the country was resilient enough to withstand any adversity.

The 1964 quarter has gained popularity among coin collectors due to its beauty as well as its historical significance. The coin’s design includes a sculpture by John Flanagan that depicts George Washington, the nation’s first president. In addition to standing out in any collection, the coin’s reeded edge and bold text add to its appeal.

Although many were eventually taken out of circulation and melted down for their silver content, the 1964 quarter continued to be used over the ensuing decades.

The 1964 quarter is still in high demand today among coin collectors and is available in a variety of conditions and grades. Many coin collectors like the challenge of locating premium, uncirculated copies of the coin, while others concentrate on gathering the various mint marks and variants of the coin.

1964 Quarter Grading

A 1964 quarter’s grade, or the grading of any coin for that matter, is dependent on how well it is preserved, which is assessed using a scale that goes from Poor to Mint State. A coin’s worth and collectibility among collectors can be significantly influenced by its condition.

It’s crucial to remember that coin grading can be somewhat subjective, and different grading firms or graders may issue slightly different ratings based on their own standards.

Also Read: Top 15 Most Valuable Quarters In Circulation

List of 1964 Quarter errors

Doubled Die Obverse

1964 Quarter Doubled Die Obverse

This mistake happens when the die that is used to strike the coin is misplaced during the striking process, leading to some design elements being hit twice and appearing doubled. The date and the word “LIBERTY” are where this inaccuracy is most obvious.

DDO (Die Deterioration Doubling)

The die that was used to strike the coins wore out over time, which is what led to this inaccuracy. The design components may appear slightly distorted or doubled as the die ages. Although this fault is not as obvious as the Doubled Die Obverse, it may still be seen in some spots on the coin.

RPM (Repunched Mintmark)

The mintmark is doubled or slightly obscured as a result of this mistake, which happens when the die is punched with the mintmark more than once. This can happen if the punch is mistakenly punched more than once or if the mintmark on the die is not properly aligned.

Clipped Planchet

Clipped Planchet

This mistake happens when a piece of the coin’s planchet is unintentionally removed during the minting procedure. This might take place if the metal strip that is used to form the planchets is not properly aligned or if the press strikes the blank without putting it in the center of the die. Planchets that have been clipped can give the coin a curved or straight edge.

Off-Center Strike

When a coin is struck off-center, an area of the design is omitted or the rim is uneven, which is called a strike error. Coins with more pronounced off-center strikes typically have higher values because of the variability in the degree of off-center striking.


This mistake occurs if the coin is struck without a collar, which results in the metal flowing outwards rather than being confined by the collar. A coin is produced as a result that is wider than it ought to be and lacks a rim. Sometimes broad-struck coins have a slightly convex form, and the degree of design completion might affect the coin’s value.

Struck Through Grease

1964 Quarter Struck Through Grease

This mistake happens when grease or some foreign substance gets on the die and leaves a part of the design blank or incomplete. The grease may prevent the metal from completely filling the die, leaving some regions of the coin with a faint or absent appearance. The degree of this error’s appearance can vary, and coins with more obvious grease strikes tend to be more valued.

Also Read: 10+ Rarest State Quarter Errors Lists (Worth Much Money!!!)

1964 Quarter FAQ

How much is a 1964 quarter worth now?

The condition, rarity, and any mistakes a 1964 quarter may have are just a few of the variables that affect its worth. A standard 1964 quarter, on the other hand, is worth its face value of 25 cents because it lacks any unique features.

The 1964-D Doubled Die Obverse quarter, which has an estimated value of up to $400,000 or more in high grades, is the priciest and most elusive 1964 quarter.

What is special about the 1964 quarter?

Because it was the final quarter produced for circulation to include silver, the 1964 quarter is noteworthy. Due to growing silver prices, the U.S. government started to phase out silver coins in the middle of the 1960s. By 1965, all quarters were minted of a copper-nickel alloy. As a result, collectors prize the 1964 quarter for its silver content as much as its value as a currency.

How much is a 1964 quarter worth with errors?

Depending on the kind and degree of the fault, the value of a 1964 quarter with errors might vary significantly. A 1964 quarter with a Doubled Die Obverse (DDO) fault, for instance, can be worth several hundred dollars or more, yet a coin with a tiny flaw, such a planchet that has been clipped, may only be worth a little bit more than its face value. The only way to acquire an accurate appraisal of a 1964 quarter with mistakes is to speak with a coin dealer or numismatic specialist.

Is a 1964 quarter all silver?

The 1964 quarters were made of 90% silver and 10% copper. This high value of silver is why they are beloved both as a collectible coin and for their silver content.

How can you tell if a 1964 silver quarter is rare?

The rarity of a 1964 silver quarter is determined by its condition, any errors, and the total number of coins produced. A 1964 quarter with a low mintage, such as a proof coin, is likely to be more valuable and rare than a typical circulated coin. A coin grading service can provide an objective assessment of a coin’s condition, while a coin dealer or numismatic expert can provide information on the rarity and value of the coin.

Leave a Comment