Hello there, fellow coin enthusiasts! Today we will be talking about a 1999 quarter value, history, errors, and a lot more that will help you learn all you need to know about this piece of numismatic history.
Let’s dive in!
1999 Quarter Value Details
- Category – 50 States quarter
- Mint – Philadelphia, Denver, San Francisco
- Mintage – 4 453 532 620
- Obverse designer – John Flanagan
- Reverse designer – William Cousins, John Mercanti, Alfred Maletsky, T. James Ferrel
- Composition – copper and nickel clad
- Weight – 5.67 g (0.2 oz.)
- Diameter – 24.3 mm (0.95 in)
- Thickness – 1.75 mm (0.06 in)
A quarter from 1999 marks the beginning of the US Mint’s 50 States program, issued to honor each of the fifty US states and their contributions to the country as a whole.
The obverse of the coin stayed the same as since 1932 – a famous portrait of the first US president – George Washington. The reverse featured different US states’ symbols and prominent figures.
The states honored in 1999 are Delaware, Pennsylvania, New Jersey, Georgia, and Connecticut.
Also Read: Top 15 Most Valuable Quarters In Circulation
1999 Quarter Value Chart
Quarters from 1999 are mostly not very valuable. Their prices usually range between a quarter dollar and around twenty dollars for those that are in mint condition.
The more valuable coins were struck in San Francisco as proof coins made of silver and those can reach the price of a hundred dollars and more if graded 67+.
| Condition | 1999 P Mint Mark Quarter Value | 1999 D Mint Mark Quarter Value | 1999 S Mint Mark Quarter Value | 1999 S Mint Mark Silver Quarter Value |
| Poor | $0.25 | $0.25 | $0.25 | $4 – $5 |
| Fair | $0.25 | $0.25 | $0.25 | $5 – $7 |
| About good | $0.25 | $0.25 | $0.25 | $7 – $10 |
| Good | $0.25 | $0.25 | $0.25 | $10 – $12 |
| Fine | $0.25 | $0.25 | $0.25 – $0.50 | $12 – $15 |
| Very fine | $0.25 | $0.25 | $0.50 – $0.70 | $15 – $17 |
| Extremely fine | $0.25 – $0.50 | $0.25 – $0.50 | $0.70 – $1 | $17 – $20 |
| About Uncirculated | $0.50 – $0.70 | $0.50 – $0.70 | $1 – $3 | $20 – $30 |
| Mint state (60-64) | $0.70 – $1 | $0.70 – $1 | $3 – $5 | $30 – $35 |
| Mint state (65-67) | $1 – $5 | $1 – $5 | $5 – $10 | $35 – $40 |
| Mint state (68-70) | $5 – $10 + | $5 – $10 + | $10 – $20 + | $40 – $100 + |
1999 Quarter Value & Varieties Guide
Quarters were produced in Philadelphia, Denver, and San Francisco in 1999. They have P, D, and S mint marks, respectively, indicating the location of minting.
Let’s learn more about the varieties of a 1999 quarter.
1999 P Mint Mark Quarter Value
A P mint mark implies that a quarter was produced in the Philadelphia mint. There were more than a billion quarters produced by the Philadelphia mint in 1999 so they are far from scarce.
A quarter with a P mint mark from 1999 will usually cost only a quarter of a dollar to ten dollars at most. However, on rare occasions, if a coin is perfectly preserved, it can sell for as much as a hundred dollars.
- Type – 50 State quarters
- Edge – reeded
- Mint mark – P mint mark
- Place of minting – Philadelphia
- Year of minting – 1999
- Face value – $0.25
- Price – $0.25 – $10 +
- Quantity produced – 1 139 932 000
- Designer – John Flanagan, William Cousins, John Mercanti, Alfred Maletsky, T. James Ferrel
- Composition – copper and nickel
- Mass – 5.67 g (0.2 oz.)
- Diameter – 24.3 mm (0.95 in)
1999 D Mint Mark Quarter Value
The Denver mint made almost double the amount of quarters compared to Philadelphia in 1999. This makes them even more common, so the prices are similar. You will rarely be able to sell a 1999-D quarter for more than ten dollars unless it is graded 68 and more.
- Type – 50 State quarters
- Edge – reeded
- Mint mark – D mint mark
- Place of minting – Denver
- Year of minting – 1999
- Face value – $0.25
- Price – $0.25 – $10 +
- Quantity produced – 2 205 408 000
- Designer – John Flanagan, William Cousins, John Mercanti, Alfred Maletsky, T. James Ferrel
- Composition – copper and nickel
- Mass – 5.67 g (0.2 oz.)
- Diameter – 24.3 mm (0.95 in)
1999 S Mint Mark Quarter Value
The San Francisco mint was the one in charge of making proof coins in 1999. It made around eighteen and a half million of them. They are slightly more valuable than the ones produced in Philadelphia and Denver, but the differences in their worth are not that significant.
Quarters from 1999 with an S mint mark start at their face value and can reach the price of around twenty dollars. Higher prices are possible for the highest-graded coins.
- Type – 50 State quarters
- Edge – reeded
- Mint mark – S mint mark
- Place of minting – San Francisco
- Year of minting – 1999
- Face value – $0.25
- Price – $0.25 – $20 +
- Quantity produced – 18 566 795
- Designer – John Flanagan, William Cousins, John Mercanti, Alfred Maletsky, T. James Ferrel
- Composition – copper and nickel
- Mass – 5.67 g (0.2 oz.)
- Diameter – 24.3 mm (0.95 in)
1999 S Mint Mark Silver Quarter Value
Another set of coins that the San Francisco mint produced in 1999 is the silver proof coins. There were around four million of these made and they contain 90% silver and 10% copper. Since their melting value is approximately $4, this is their lowest price.
These silver proof coins can reach the price of a hundred dollars and even much more if they are graded over 68.
- Type – 50 State quarters
- Edge – reeded
- Mint mark – S mint mark
- Place of minting – San Francisco
- Year of minting – 1999
- Face value – $0.25
- Price – $4 – $100 +
- Quantity produced – 4 022 825
- Designer – John Flanagan, William Cousins, John Mercanti, Alfred Maletsky, T. James Ferrel
- Composition – silver (90%) and copper (10%)
- Mass – 6.25 g (0.22 oz.)
- Diameter – 24.3 mm (0.95 in)
Also Read: Top 16 Most Valuable Modern Quarters Worth Money
1999 Quarter History
1999 was the first out of ten years during which the US Mint put all fifty states and US territories on the reverse side of a quarter. Before this year, the US quarter had a flying eagle theme on the back side of the coin.
1999 Quarter Appearance
The obverse of the US quarter hasn’t changed much since it was first introduced in 1932. The person who designed the iconic Washington quarter is John Flanagan.
The front side of the coin features George Washington’s left-facing profile. On top of the coin is the country’s name, UNITED STATES OF AMERICA.
On his left side you can see the word LIBERTY and on the right side is the United States motto, IN GOD WE TRUST. Right below the motto is a mint mark and below the profile is the denomination, QUARTER DOLLAR.
This design is only slightly different when compared to the one from the years before. The US Mint had to move a few details from the reverse to the obverse to accommodate the new designs on the back of the coin.
There were five different designs for the reverse side of the 1999 quarters.
1999 Delaware Quarter Design
The first in a series of coins honoring the US states is the Delaware quarter. This is because Delaware is considered the first US state. At the center of the coin’s reverse is Caesar Rodney.
He was famous for riding on a horse for 80 miles in terrible weather conditions to cast Delaware’s vote for the Declaration of Independence, which turned out to be the deciding vote. Rodney later became the president of the state of Delaware.
Right next to his picture on a horse is his name. To his left side are the words THE FIRST STATE. On top of the coin is the name of the state, DELAWARE, along with the year it was founded, 1787.
The year of minting, 1999, is engraved at the bottom of the coin, along with the motto, ET PLURIBUS UNUM.
1999 Pennsylvania Quarter Design
The Pennsylvania quarter was the second one in the series and it was released in March 1999.
It features the Commonwealth statue built in Harrisburg, Pennsylvania, in 1905. The name of the state is written on the top of the coin along with the year of its foundation, 1787.
To the statue’s right side are the words VIRTUE, LIBERTY, and INDEPENDENCE. The bottom of the coin features the same elements as the previous one.
1999 New Jersey Quarter Design
A New Jersey quarter was released third, in May of 1999. It features the design of George Washington in the army in 1776 when the US military fought off the British. The design was inspired by Emanuel Leutze’s painting from the end of the nineteenth century.
The top of the coin is engraved with the words NEW JERSEY and the year 1787 while the bottom is the same as the previous two coins from this series.
Below the design of the army are the words CROSSROADS OF THE REVOLUTION, referring to New Jersey.
1999 Georgia Quarter Design
A Georgia quarter was issued in July 1999. This state’s nickname is the Peach State, which is why the design features a peach at the center of the coin.
The tree of the state is oak so the design also includes the oak tree branches around the inner circle of the coin. In between them are the words WISDOM, JUSTICE, and MODERATION, referring to Georgia’s motto.
On the top part of the coin is the name of the state along with the year 1788 when it was founded.
1999 Connecticut Quarter Design
A Connecticut quarter was the last one released as a part of the 50 States program in 1999. It was issued in October.
This quarter features an oak tree, more commonly known as the Charter Oak tree because the legend says this tree hid Connecticut’s charter from the British king back in 1662. To the left side of the tree are the words THE CHARTER OAK.
The name of the state, CONNECTICUT, along with the year in which it became a state, 1788, is written on top of the coin.
Also Read: 10+ Rarest State Quarter Errors Lists (Worth Much Money!!!)
1999 Quarter Grading
If you are not sure how valuable your coin is or if you think that you have a special piece of numismatic history in your collection, you should have it graded.
If you don’t have a coin grading service near you, you may be able to ship your coin to another city or state. If you indeed have a unique coin, the hassle will be worth it.
1999 Quarter List of Errors
There are certain errors that occur during the minting process that can increase the value of a coin by a lot. These errors are usually obvious but sometimes you will need a keen eye to notice them, so always double-check to see if your coin is unique.
1. 1999 Quarter Rotated Die Error
The obverse and the reverse of a coin should be aligned at the same angle. When this is not the case, the coin has an error called a rotated die. This mistake can increase the value of your 1999 quarter by as much as a hundred dollars!
2. 1999 Quarter Die Cracks
Die cracks happen when the dies get damaged over time due to the high pressure constantly applied to them.
The most famous die crack is the one on the Delaware quarter where the horse looks like it’s spitting due to the raised part of the coin right beneath it.
These coins sell for $20 to $300 depending on the condition of the quarter.
3. 1999 Quarter Double Die Error
Your coin has the double die error if it has a doubled image or at least parts of the image. This mistake is not as rare as the other ones, but if your coin is well-graded, you can certainly sell it for much more than if it didn’t have this error.
1999 Quarter FAQ
What is special about the 1999 quarter?
Quarters from 1999 are special because this was the first out of ten years of the 50 States program by the US Mint.
How much is a 1999 all silver quarter worth?
A 1999 quarter made of silver was produced in the San Francisco mint as a proof coin. These quarters are worth at least several dollars because of the silver content, no matter the condition of the coin. Those that are graded 67 and above can be worth several hundred dollars.
How many different 1999 quarters are there?
There are five different 1999 quarters – Delaware, Pennsylvania, New Jersey, Georgia, and Connecticut quarters.